Birty Dastards Jeep Club

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Injector seal replacement on WJ 2.7 CRD  (Read 2184 times)

0 Members and 1 Guest are viewing this topic.

Dutch

  • The Curator
  • Club Member
  • Forum Member
  • *
  • Guru: 12
  • Offline Offline
  • Posts: 5798
Injector seal replacement on WJ 2.7 CRD
« on: March 21, 2010, 01:25:04 PM »

For future reference :  (because it will happen to you one day...... :icon_eek:)

Well known issue with the ML engines

Injector seals 5 x
Injector washer 5 x
Injector clamp bolts 5 x
(note : the stretch bolts are not re-usable and HAVE to be replaced)

All for the princely sum of GPB 26.02 (inc.vat)

Drop transverse gearbox bracket and fit longer bolts (3-4 inches) to keep in place
Stripping systems on cylinder head to gain access.
Drop back end of engine to create space above cilynder head to pull injector nbr 4 & 5 out.
Clean-up injector seats & shafts and general area iwo leaking injector
Rebuild as required.

8 hours labour @ GPB. 40,- = GBP.320,00 (ex vat)

Total bill : GBP 401.56 (in vat)

Garage went ahead replacing all 5 seals because the impact in labour and materials is negligable.  If nbr.4 went at a later date I'd have to go
through the whole process again or drill a hole in the plate above.

Also see topic in tech. with info from difflock.
http://www.birtydastards.com/frm/index.php?topic=12145.0







Logged

Jeepless :-( 2006 Chrysler Crossfire Roadster 3.2 V6 - 1993 Yamaha FJ1200
Pages: [1]   Go Up
 

Powered by EzPortal